Tape measure stretched across the width of an old tub alcove in a small bathroom, tile samples on the tub rim

What a Bathroom Remodel Costs and What Moves the Price

The typical price range around Dayton, what pushes it up or down, and how we get you the exact number for your bathroom.

Around Dayton

Typical bathroom remodel cost range

A bathroom remodel here typically lands in the range below, and the US average rises or falls the same way, with what the homeowner wants.

The local range is wide for a plain reason: a new surround and a room taken back to the studs are both called a remodel.

Call for a Free Estimate

The typical range

Most bathroom remodels in Dayton

$6,500 to $37,800

Per bathroom, depending on the size of the room and how far the work goes.

Partial remodel

$2,200 to $5,800

Typical for updating part of the room while the rest stays.

Full remodel

$20,000 to $35,000

Typical when the whole room is rebuilt, fixtures and finishes included.

These are typical ranges for the area, not our quote. The exact price for your bathroom comes from measuring it, and the estimate is free.

Price Factors

What moves the price

The price is set by the scope of work, the fixtures and materials, the size of the room, and whether the drain, supply lines or electrical have to move.

Floor area alone decides less than most people expect. Two bathrooms the same size can land far apart once the scope and the fixtures are settled.

These are the factors that set the price, largest first:

  1. Scope

    How far the work goes moves the price more than anything else: new walls over the old tub, or the room taken back to the studs.

  2. Fixtures

    The tub, shower valve, toilet and vanity you choose carry their own spread of prices, and together with the scope they set the number.

  3. Materials

    Tile, wall panels, countertops and glass each run from plain to premium, and the ones chosen change the cost.

  4. Size

    A bigger room takes more tile, more board and more hours, though size on its own does not decide the price.

  5. Plumbing moves

    Keeping the drain and supply lines where they are costs less than moving them; a new "rough-in", the pipes in the wall, raises the cost.

  6. Electrical

    Moving or adding circuits for a fan, lighting or heated floors changes the cost the same way moving plumbing does.

Bathroom floor opened after demolition, showing water-stained subfloor around the old drain opening

After Demolition

Hidden damage found behind the walls

The price changes after demolition when the old tub and tile come out and reveal moisture damage, rotted framing or a soft subfloor, because repairing them adds work hidden from view on the estimate visit.

When that happens, we show you what we found and write the repair down as a "change order", with what it adds to the cost and the timing. Nothing goes ahead until you approve it, which is how we hold to no surprise charges after the quote.

Getting a Quote

A written scope and an in-person measure

An accurate price takes measuring the bathroom and settling the materials in person, then a written proposal with the scope of work, a cost estimate and material options.

A detailed scope agreed before construction is what cuts unexpected costs and changes later; the National Association of the Remodeling Industry (NARI) is the trade's reference for how remodeling work is scoped and contracted.

This is how a quote comes together, from the call to the start:

  1. You call

    Tell us what the bathroom needs. We answer or call back the same working day, and the estimate is free with no obligation.

  2. We measure in person

    We come to the house, measure the room, and look at the tub, the walls, the floor and where the drain and supply lines run.

  3. Materials, face to face

    We go over tile, panels and fixtures with you, since what you choose is part of the price.

  4. The written proposal

    Everything we talked through goes on paper, so you can weigh it at home before deciding.

  5. The scope is agreed

    We settle every detail of the scope before construction starts, so the number you plan around holds.

Spending Less

Lower-cost ways to update a bathroom

Keeping the fixtures where they are is the surest way to spend less, because a surround replacement needs far less plumbing than a full "tub-to-shower conversion".

A conversion usually moves the drain and replaces the shower valve, and that new rough-in is where the cost climbs. If the layout already works for you, ask us what it takes to keep it.

Tub, shower and one day updates

A tub swap, a surround replacement or a one day update costs less than a full remodel because the layout stays as it is.

Here is how the lower-cost jobs compare:

  • Tub swap

    The old tub comes out and a new one goes into the same alcove, with the drain and faucet reconnected where they already sit.

  • Least plumbing

    Surround replacement

    New tub or shower walls, such as seamless "cultured marble" panels, over the tub or base you keep. With no fixtures moving, the plumbing work stays small.

  • One day update

    Acrylic walls and a new base fitted over a tub or shower that still works but looks worn, measured ahead so the materials are ready before we start.

    one day bathroom remodel

Full remodelMoving the drain, supply lines or electrical, or changing the layout, costs more than any of these and takes longer.

Free Estimates

Get the Price for Your Bathroom

The ranges above are a starting point. Call, and we come out, measure the room and put the whole job in writing before any work starts.

Monday through Saturday. Calls outside those hours go to voicemail and we return them the next working morning.

  • The whole job quoted before we start
  • Free, no-obligation estimates
  • Same-day call back
Call (937) 365-8291